Research Grants

 

“Manufacturing Education: Educational Awareness and Technology,” Illinois Board of Higher Education, HECA FY 2002, (PI), [$231,994], May 2001. [Not Funded].

"Enhancing the Minority Technological Pool," National Science Foundation, (Co-PI), [$250,000], 2000. (Not Funded).

"Real-Time Modeling of Integrated Production Control Systems," Summer Research Fellowship, (PI), [$5,000], Summer 1994 (Funded).

"EDS Unigraphics VPD Maturity Assessment Tool Development," EDS Unigraphics, (Co-PI), $33,843, 1994 (Not Funded).

"Production Constraints As Control Variables for Maintenance Systems Planning," Summer Research Fellowship, (PI), [$5,000], Summer 1993, (Funded).

"Academic Agility: Keeping CIM Education Ahead," Advanced Research Projects Agency,  (Co-PI), [$2,795,123], 1993 (Not Funded).

"Supervised Learning Approaches to Maintenance Control Processes," Summer Research Fellowship, (PI), [$2,000], Summer 1992 (Funded).

"Design of Knowledge-Based Control System for Failure and Recovery in Flexible Manufacturing Cells," Funded University Research, (PI), [$10,000], AY-1991/92, (Funded).

"Research Equipment and Tools Competition Award," (Co-PI), [$5,305], 1992 (Funded).

 

Selected Publications

 

Eneyo, E. S. "Technology and Industrialization of the Nigerian Economy," Proceedings of the 6th Africa-USA International Conference on Manufacturing Technology, Abuja, Nigeria, July 8-11, 2002.

Eneyo, E. S. and Gupta, S. "A Design Methodology for Condition-Based Maintenance of Computer-Controlled Numeric Machine," Proceedings of the 5th International Conference on Engineering Design and Automation, Las Vegas, Nevada, August 5-8, 2001, pp. 565-570, 2001

Eneyo, E. S.and Pannirselvam, G. P., "Process Simulation for Facility Layout," IIE Solutions, Vol 31, No. 11, pp. 37-40, 1999.

Eneyo, E. S.and Pannirselvam, G. P., "The Use of Simulation in Facility Layout Design: A Practical Consulting Experience," Proceedings of the 1998 Winter Simulation Conference, D. J. Medeiros, E. F. Watson, J. S. Carson and M. S. Manivannan (eds.), Washington D.C., December 13-16, 1998, pp. 1527-1532.

Eneyo, E. S., "Teaching Computer-Based Integrated Concepts in Production Planning and Control: A Design and Team-Oriented Approach," Proceedings of the 22nd International Conference on Computers and Industrial Engineering, Cairo, Egypt, Dec. 20-22, 1997, pp. 335-338.

Eneyo, E. S., "Technology Transfer to Developing Countries: The Missing Links,"  International Journal of Industrial Engineering, Vol. 2, No. 3, September 1995, pp. 179-188.

Udoka, S. J. and Eneyo, E. S., "A Framework for Technology Adoption In Developing Countries: Nigeria as Case Example," Proceedings of the Second International Conference on Manufacturing Technology, Lagos, Nigeria, August 8-11, 1994.

Eneyo, E. S., "Modeling Production Systems Planning and Control Using Design/IDEF," Proceedings of the 16th International Conference on Computers and Industrial Engineering, Ashikaga, Japan, March 7-9, 1994.

 

Selected Presentations

 

Eneyo, E. S. "Technology and Industrialization of the Nigerian Economy," Presented at the 6th Africa-USA International Conference on Manufacturing Technology, Abuja, Nigeria, July 8-11, 2002.

Eneyo, E. S. and Gupta, S. "A Design Methodology for Condition-Based Maintenance of Computer-Controlled Numeric Machine," Presented at the 5th International Conference on Engineering Design and Automation, Las Vegas, Nevada, August 5-8, 2001, pp. 565-570, 2001

Barnes, Tracy and Eneyo, E. S., “Programmable Automotive Starter System With a Knowledge-Based User Interface,” Presented at the 12^th Annual Argonne Symposium for Undergraduates in Science, Engineering, and Mathematics, Argonne National Laboratory, Division of Educational Programs, Argonne, Illinois, Nov. 9-10, 2001. 

Barnes, T. and Eneyo, E. S., AProgrammable Automotive Starter System (PASS),@ Presented at the 11^th Annual Argonne Symposium for Undergraduates in Science, Engineering, and Mathematics, Argonne National Laboratory, Division of Educational Programs, Argonne, Illinois, November 3-4, 2000.

Eneyo, E. S., AAnalyzing Trade-offs Between Production and Maintenance Effectiveness,@ Presented at the 9^th Annual Industrial Engineering Research Conference, Cleveland, OH, May 21-23, 2000.

Eneyo, E. S., AEstimation of Inventory Carrying Cost as a Management Policy Variable,@ Presented at the Fall Annual Conference of The Institute for Operations Research and Management Sciences (INFORMS), Philadelphia, PA, November 7-10, 1999.    

Eneyo, E. S.,  AThe Imperatives of Technology and the Development of an Industrial State: The Case for Nigeria in general and Rivers State of Nigeria in particular,@ Presented at the 9^th Annual Convention of The Rivers State Foundation, Dallas, Texas, September 3-6, 1999

Eneyo, E. S. and Van Roekel, J. H., A The Importance of Inventory Carrying Cost in Corporate Project Planning,@ Seminar presentation to Anheuser-Busch technical staff, St. Louis, Missouri, June 17, 1999.

 

Selected Technical Reports

 

[EE00-1] Ragavendar, S. and Eneyo, E. S., "Detection of Skin Tumors Using Expert System,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Summer 2000.

[EE99-1] Wallace, F. M..and Eneyo, E. S., "EXPERTVISION: A Digital Image Processing Enhancement Program,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Summer 1999.

[EE98-1] Tummarakoti, S. and Eneyo, E. S., "A Computerized Framework of Maintenance Strategies for Automated Machine Tools in a Manufacturing Environment,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Spring 1998.

[EE97-2] Sharma, A., Rahman, M. Z. and Eneyo, E. S., "Application of Artificial Neural Network in Predicting the Amount of Final Product Generated from an Anaerobic Digester,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Fall 1997.

[EE97-1] Mohnalkar, V. and Eneyo, E. S., "Expert System for Design of Reinforced Concrete Structures,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Summer 1997.

[EE96-1] Krus, E. A. and Eneyo, E. S.., "Beer Loading Advisor for Palletized Load Patterns,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Summer 1996.

[EE95-4] Ranabothu, R. R. and Eneyo, E. S., "Construction and Simulation of Artificial Neural Network Models for Combinational Digital Circuits Used in Computer Systems,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Ilinois, Fall 1995.

[EE95-3] Chen, J. and Eneyo, E. S., "Artificial Neural Network for Soil Erosion Classification and Mapping,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Fall 1995.

[EE95-2] Vaughn, B. M., and Eneyo, E. S., "Training an Artificial Neural Network to Predict The Unconfined Compressive Strength of Cement Kiln Dust Stabilized Aggregate,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Fall 1995.

[EE95-1] Garapati, S.  and Eneyo, E. S.., "Application of Neural Networks to Concrete Beam Design,@ Technical Report, Department of Mechanical and Industrial Engineering, Southern Illinois University, Edwardsville, Illinois, Fall 1995.