Southern Illinois University Edwardsville Logo
Apply to SIUE
Library and Information Services

Library and Information Services
Institutional Header

Smart Classroom Equipment Operation Instructions

  1. Pull down screen in front of classroom.
  2. Open equipment lectern.
  3. Retrieve Sharp LCD Projector remote from inside lectern.
  4. Turn the Sharp LCD Projector remote face up. Press the ON button located at the top left corner on the remote to turn on the ceiling mounted Sharp Video/Data Projector. The red light on the bottom of the ceiling mounted projector should go off and a green light will turn on. It will take 20 to 30 seconds to fully power up the projector.
  5. Turn on the other data/audio/video components you will use by pressing individual power buttons to power up the Sharp VCR, JVC stereo receiver and/or the desktop computer stored in lectern. Slide out computer keyboard and mouse drawer.
  6. Use Input Select button on Sharp LCD Projector remote to choose visual input source to activate that projector function. Each time you press the input select button it cycles to the next visual input:
Your Visual Input Source Remote Input Select Button
PC Computer Input 1
Laptop Computer Input 1
Panasonic VCR Video 1
DVD Player - where available* Video 1
*DVD Players are not available in all smart classrooms. DVD operations require the VCR power to go be on and VCR set to channel AUX 1.
Sharp LCD Projector Remote image
  1. Press the Power button on the JVC RX-5000 receiver to turn on the main power. Press the Source Select button (i.e. VCR, FM, CD, AM) to make your audio selection according to the table below. Receiver can also be operated using the JVC remote.

  2. JVC RX-5000 Receiver control panel

    PC CD
    Laptop TAPE/MD
    FM/AM Radio FM/AM
    The DVD MULTI, DVD and PHONO audio options are not connected, and should not be selected.

  3. Adjust JVC Receiver volume levels to suit. Note: DO NOT PRESS "Speakers 2" button. It must be in the off position or speakers will not work. The "Speakers 1" button should be the only button in the ON position.
Return to Smart Classrooms
facebookoff twitteroff vineoff linkedinoff flickeroff instagramoff socialoff