We are in process of terminating BS (Bachelor of Science) in Manufacturing Engineering Program and launching a specialization track in Manufacturing Engineering under BS Industrial Engineering. Please contact for more information Engineering Student Services at http://www.siue.edu/engineering/studentservices

Curriculum for MANUFACTURING ENGINEERING Major

131 Semester Hours
LOWER DIVISION COURSES
(pre-engineering)
 
FRESHMAN YEAR
Fall Cr   Spring Cr
CHEM 131 Engineering Chemistry (BPS) 4   ENG 102 English Composition II 3
CHEM 135 Engineering Chemistry Lab (EL) 1   MATH 152 Calculus II (BPS) 5
ENG 101 English Composition I 3   PHYS 151 University Physics I (BPS) 4
IME 106 (a) Engineering Problem Solving 3   PHYS 151L University Physics Lab I (EL) 1
MATH 150 Calculus I 5   SPC (c) 103 (b)
or 105
Interpersonal Comm. Skills
Public Speaking
3
  16     16
 
SOPHOMORE YEAR
Fall Cr   Spring Cr
CE 204 Engrg. Graphics & CAD 3   CE 242 Mechanics of Solids 3
CE 240 Statics 3   CS 145+ Intro to Computing for Engrs 5
MATH 250 Calculus III (BPS) 4   ECE 210 Intro to Electric Circuits 3
PHYS 152 University Physics II (BPS) 4   ECON 111 Macroeconomics (BSS) 3
PHYS 152L University Physics Lab II (EL) 1   MATH 305 Differential Equations I 3
Breadth Fine & Performing Arts (BFPA) 3   ME 262 Dynamics 3
  18       + CS 140 is an acceptable substitute 18

     ADMISSION TO UPPER-DIVISION COURSES REQUIRES SATISFACTORY COMPLETION OF LOWER-DIVISION CORE COURSES (see catalog for specific requirements). An "APPLICATION FOR ADMISSION TO UPPER-DIVISION ENGINEERING COURSES" FORM MUST ALSO BE COMPLETED AND APPROVED. This form is available at all engineering department offices.

UPPER DIVISION COURSES
 

JUNIOR YEAR
Fall Cr   Spring Cr
IME 365 Quantitative Methods in Engr. (e)
or STAT 380
3   IME 345 Engineering Economic Analysis (e) 3
IME 370 Manufacturing Processes (e) 3   IME 465 Design & Control of Quality System 3
IME 375 3-D Modeling in Product Design 3   IME 470 Manufacturing Systems 3
ME 310 Thermodynamics I 3   IME 482 Manufacturing Engineering Design (e) 3
ME 370 Materials Engineering 3   Breadth Life Sciences (BLS); Health Experience (EH) 3
Breadth Info & Comm in Society (BICS) 3        
  18        15
 
SENIOR YEAR
Fall Cr   Spring Cr
IME 480 Tool Engineering 3   IME 475 CAD/CAM/CAE 3
IME 483 Production Planning & Control 3   IME XXX MfgE Elective III** 3
IME XXX MfgE Elective I** 3   IME 490 Integrated Engineering Design 3
IME XXX MfgE Elective II** 3   IS XXX Interdisciplinary Studies (d) (IS)/
Global Cultures (EGC)
3
IME 476 Plantwide Process Control 3   PHIL 323 Engrg, Ethics & Professionalism 3
               
  15        15

(a) IME 106 is restricted to entry freshmen in engineering only. Transfer students with more than 16 credit hours must fulfill this requirement with PHIL 106 or equivalent.
(b) SPC 103 or IS375 satisfies the Intergroup Relations requirement and it is, therefore, recommended. However, if SPC 104 or 105 is taken instead, then an additional course from the list of Intergroup Relations courses in the current SIUE Undergraduate Catalog must also be taken.
(c) The General Education courses listed in the curriculum guide meet Option A of the skills requirement. A student who wishes to select Option B may replace IME 106 and SPC 103 or 104 or 105 with two semesters of a foreign language (101 and 102). An appropriate course is required to meet the Intergroup Relations requirement for students selecting Option B (see current SIUE Undergraduate Catalog).
(d) In order to satisfy the International Issues (II) or International Culture (IC) requirement, FL 111a, 111b, or 111c or IS 324, 326, 336, 340, 375, 377, or 400 should be considered. If not, an additional course from the list of II/IC courses in the current SIUE Undergraduate Catalog must also be taken.
(e) A grade of �C� or better is required for graduation

MANUFACTURING ENGINEERING ELECTIVES

     Not all elective courses are offered every year. The courses to be offered are selected from the list below on the basis of student demand and faculty availability. Elective courses have 1.5 hours of design as a minimum.
     Three required electives must come from the following list, with at least two electives from the IME classification:

Approved List of IE Electives Cr. Fall Spring Summer
IME 427 Knowledge-Based Systems 3   X X
IME 430 Managing Engineering and Technology 3     X
IME 463 Reliability Engineering 3 X    
IME 466 Engineering Metrology 3 X    
IME 467 Total Quality and Taguchi Methods 3   X  
IME 468 Operations Research - Simulation 3 X    
IME 477 Computer Integrated Manufacturing Sys. 3   X  
IME 488 Lean Production 3   X  
ME 380 Design of Machine Elements 3   X  
ME 458 Mechatronics 3 X    

     For all other approved technical electives, please see the program director for details as these tend to change from time to time.

EVENING AND SECOND COURSE OFFERINGS

     IME courses are offered during either the Fall or Spring Semester as shown on the reverse side of this page. Additional offerings of many IME courses are available as shown below. (The department reserves the right to cancel these offerings because of lack of student demand or faculty availability.)

    
Courses with Evening Offerings Cr. Fall Spring Summer
CE 204 Engineering Graphics & CAD 3 X X X
CE 240 Statics 3     X
CE 242 Mechanics of Solids 3     X
ECE 210 Introduction to Electric Circuits 3 X X X
IME 345 Engineering Economic Analysis 3     X
IME 427 Knowledge-Based Systems 3   X X
IME 430 Engineering Management 3     X
ME 262 Dynamics 3     X
ME 310 Thermodynamics I 3     X

     Declaration of Major: Students interested in any of the majors offered by the School of Engineering should seek advisement from the School of Engineering when they initially enroll in the University and should declare a major as soon as possible. Students admitted to programs offered by the School of Engineering shall have met University admission requirements, successfully completed any required academic development and high school deficiency courses, completed MATH 120 - College Algebra (or high school equivalent) with a grade of C or better, and have a cumulative GPA of 2.0 or better in any completed university course work.
     Students with high school deficiencies, those with AD (academic development) requirements, and those starting in a mathematics course before MATH 150 - Calculus I, will require more than the eight (8) academic semesters shown in this curriculum guide. This may require a summer session(s) or an extra semester(s).
     Enrollment in Upper-Division IME Courses: The requirements for enrollment in upper-division IME courses are: satisfactory completion of all university and School of Engineering admission requirements; satisfactory completion of English, speech, chemistry, mathematics, and physics courses shown in the first two years of the program with a GPA of 2.0 for non-transfer students, transfer students from articulated programs, and Illinois resident transfer students (2.25 for other transfer students); a GPA of 2.0 or better in CS 140, CE 204, CE 240, ECE 210, and CE 242 (both original and repeat grades are computed in the GPA); and an approved application for enrollment in upper-division engineering courses.
     Minor Requirements: 21 hours are required, including IME 345, 365, 370, 415 and 451. The remaining two courses are electives to be selected from the following four courses: IME 458, 468, 483 and 484. Other substitute electives are subject to approval by the Program Director of Industrial and Manufacturing Engineering.